Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: FS: 86 GT Hatch Roller Project Revised Ad

  1. #1
    GTAMC Executive 99chromegt's Avatar

    Join Date
    Sep 2012
    Location
    Dundas
    Posts
    10,118

    Icon2 FS: 86 GT Hatch Roller Project Revised Ad

    Very Clean 86 Mustang GT roller project with....

    Braking, Suspension & Other:
    Cobra front brakes
    94/95 SN spindles
    SN95 master / booster
    Hurst line lock
    New Maximum Motorsports stainless braided lines front & back
    New Maximum Motorsports rear hardline kit for SN five lug disc swap
    New Steeda full length subframe connectors
    Stock K member
    Stock struts, shocks & springs
    Stock SN rear end & gear
    Stock clutch cable
    Stock upper & lower rear control arms
    Stock speed density ECU
    Wiring harness with Mass air conversion
    New fuel tank grommet
    Walbro 340L Fuel pump
    New rear hatch struts
    New windshield
    Proper ownership

    Parts not with project:
    No motor, transmission or driveshaft
    No rad or fan
    No battery
    No coil
    No front seats
    No fog lights
    No cruise control
    No exhaust


    Chassis is VERY CLEAN. Needs paint & some assembly required. This is a project not a pop in drivetrain & go deal. There is a box with labeled bags of hardware. All body panels hanging on car but not 100% fastened for easy disassembly before paint. An old rusty set of winter steel wheels will be on the 86 to roll it. Truly clean fox body mustangs are getting harder to find. Great foundation for a build. Ready for pickup starting March 25 or 26. Sorry will not hold it or consider it sold unless cash is in my hand.

    $5000 firm ..Cash no trades. Any questions ask away, however serious enquiries only please.

    MM CC plates & drag wheel setup in pics are NOT included.








    Thanks for checking out the ad.

  2. #2
    GTAMC Executive 99chromegt's Avatar

    Join Date
    Sep 2012
    Location
    Dundas
    Posts
    10,118
    Still haven't had time to drop the front suspension & put back some of the stock suspension. But I can make it happen quickly with a deposit.

  3. #3
    GTAMC Executive 99chromegt's Avatar

    Join Date
    Sep 2012
    Location
    Dundas
    Posts
    10,118
    Will sell for $5000 with aftermarket front suspension & cobra brakes. 8 bolts and the stock SN rear is in & it's a roller. SN rear will need a pinion seal & new fluids.

  4. #4
    GTAMC Executive 99chromegt's Avatar

    Join Date
    Sep 2012
    Location
    Dundas
    Posts
    10,118
    I move in 25 days.
    Pic of the clean shock tower, new MM cc Plate & mass air conversion MAF harness

    I popped a set of rough SN 5 lug mustang wheels on the 86 which go with it.

    SN booster with Hurst line lock


  5. #5
    New Member

    Join Date
    Jun 2016
    Location
    Toronto
    Posts
    6
    Ware are you located?. Send me a text please.647 407 9687 Ryan

  6. #6
    GTAMC Executive 99chromegt's Avatar

    Join Date
    Sep 2012
    Location
    Dundas
    Posts
    10,118
    Bump. 20 days until I move

  7. #7
    GTAMC Executive 99chromegt's Avatar

    Join Date
    Sep 2012
    Location
    Dundas
    Posts
    10,118
    Bump 15 days until I move & if I move it I'm keeping it.

  8. #8
    GTAMC Executive 99chromegt's Avatar

    Join Date
    Sep 2012
    Location
    Dundas
    Posts
    10,118
    Mrs Chrome says sell that thing we aren't taking it with us. $4600 this weekend! It won't go any lower because Mr. Chrome has bought a house with a two car garage!

  9. #9
    GTAMC Executive 99chromegt's Avatar

    Join Date
    Sep 2012
    Location
    Dundas
    Posts
    10,118
    The 86 has the stock SN 5 lug rear end & suspension in it now & is ready to roll onto a trailer. Waiting on a deposit to come at some point this week but cash in hand takes it now.


  10. #10
    GTAMC Executive 99chromegt's Avatar

    Join Date
    Sep 2012
    Location
    Dundas
    Posts
    10,118
    No sign of two people saying they would take it this week. I guess the week isn't over officially. I move next Friday. One more week to go!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •